• Baltic Valve Technical Articles
An Automatic Detection Device for Floating Ball Valves (Part two)

2.1 Automatic Detection Device for Floating Ball Valves Figure 3 illustrates the operating principle of the pneumatic system of the floating ball valve automatic detection device. The device is equipped...

read more


An Automatic Detection Device for Floating Ball Valves (Part one)

Abstract: The hydrogen-side oil return control box is a critical component of the dual-circulation seal oil system in turbine generators, and its liquid level is primarily controlled by the opening...

read more


Applying Valve Diagnostic Technology During Nuclear Power Plant Commissioning

Abstract: The Initial Test Program (NRC RG 1.68) for water-cooled reactor nuclear power plants was revised from the 2007 edition to the 2013 edition, requiring that valve diagnostic tests be performed...

read more


Design of a Smart Gas Meter Ball Valve with Visual Switch Status Indication and Dual-Mode Magnetic Lock

Abstract The gas meter front ball valve (hereinafter referred to as the ball valve) is installed on the main gas supply pipeline upstream of the gas meter and is used to control the gas supply to the...

read more


Application of Magnetic Flux Leakage (MFL) Inspection Technology for Subsea Pipeline Valves

Subsea pipelines are critical links between offshore oil and gas production facilities and onshore terminals, transporting media such as crude oil and natural gas. Their safe and reliable operation...

read more


Frequent Oil Pump Start-Stop in Ball Valve Systems at Jurong Pumped Storage Power Station

Abstract The ball valve system at Jurong Pumped Storage Power Station is equipped with two screw-type oil pumps. During the commissioning of Unit 2, the oil pumps exhibited frequent start–stop cycles...

read more


Fault Analysis and Diagnosis of Pneumatic Globe Valves in Nuclear Power Plants

Abstract Small-bore pneumatic globe valves in nuclear power plants are subject to strict technical and safety requirements, making them a critical focus in the localization of nuclear power equipment. During...

read more


Design and Implementation of an Automatic Coaxiality Adjustment Device for Mining Spherical Gate Valves

Abstract This paper presents the design of an automatic coaxiality detection and adjustment system developed for the ball and seat geometry of a mining spherical gate valve. The device incorporates an...

read more


High-Pressure Ball Valve Design: Strength and Sealing Analysis

Abstract Ball valves, as essential components for regulating fluid flow, are widely employed across modern industrial sectors. However, under high-pressure conditions, their structural integrity...

read more


Key Technologies and Design Considerations for Hydrogen Pipeline Ball Valves

Abstract: With the rapid expansion of long-distance hydrogen pipelines in China, the application of pipeline ball valves is expected to become increasingly widespread. However, China currently...

read more


Erosion Behavior of V-Type Control Ball Valves in Coal Chemical Systems (Part Two)

2. Flow Field Simulation Analysis 2.1 Flow Field Simulation Calculation Theory 1) Turbulence Model Due to the complex internal flow path of the V-type ball valve and the large pressure gradient at the...

read more


Erosion Behavior of V-Type Control Ball Valves in Coal Chemical Systems (Part One)

Abstract: To address the erosion and wear problems affecting blackwater valves in coal chemical process pipelines, a V-type control ball valve was selected as the research subject. Based on computational...

read more


High-Pressure, High-Flow Ball Valve Sealing Simulation Study

Abstract This paper investigates the sealing performance of high-pressure, high-flow ball valves. Traditional sealing design methods often prove inadequate for meeting the demands of complex operating...

read more


Impact of Disc Springs on Ball Valve Performance

Abstract When designing ball valves—especially trunnion-mounted ball valves—disc springs play a critical role in determining overall performance. Disc springs primarily provide sealing...

read more


Nuclear-Grade Bellows Globe Valves for Hard-to-Access Areas in Nuclear Power Plants

This paper presents the detailed structural design of a nuclear-grade bonnetless bellows globe valve. Design verifications—including flow characteristics, structural stiffness, and seismic...

read more


Research on Shut-off Valve Selection for the LNG Industry

Abstract: Driven by the “dual carbon” goals, the demand for natural gas and the LNG import market are expanding, making the stable and efficient operation of LNG receiving terminal equipment...

read more


Micro-Crack Aging Detection Technology for Globe Valve Stems in Nuclear Power Applications

Abstract: Microcracks in the stems of globe valves used in nuclear power plants are often caused by substandard stem materials, improper heat treatment, stress concentration, pitting, intergranular corrosion,...

read more


FEA and Design Optimization of Cryogenic Globe Valves

Abstract: This study presents the structural optimization of a cryogenic globe valve for liquid helium and liquid hydrogen applications using epoxy fiberglass components, aiming to reduce heat leakage...

read more


Central Heating Valves: Selection and Maintenance

Abstract: With the rapid development of central heating systems, valves—an essential component—are receiving increasing attention when it comes to selection. This paper aims to explore...

read more


Causes and Solutions for Filter Clogging in Wax Oil Hydrogenation Water Injection Pipelines

Abstract: Wax oil is a gas-phase product generated by the hydrogenation unit. Before entering the cold high-pressure separator, it is injected with a 1:1 mixture of desalted water and stripping purified...

read more